SIG10 Enclosure
The most popular turnkey enclosure on the market. Is it worth $1,999?
The SIG10 is the best turnkey enclosure on the market if you value time over money. It's $1,999 for something you could build for $150 in conduit — but you don't want to build it, or you want it to look professional. The tool-free assembly, foam padding, and premium screen make it feel like a real commercial build. If you've got the budget and you don't want to spend a weekend with a hacksaw and conduit bender, this is the enclosure to buy.
Shop Indoor Golf SIG10 Enclosure · $1,999
What We Love
- +Tool-free assembly — no cutting, no drilling, no conduit bending
- +Built-in foam padding around all edges protects both you and the frame
- +Side netting included in the price — catches those offline shots
- +Premium mat connector system keeps the hitting area aligned with the screen
- +Heavy-duty aluminum frame — will outlast your launch monitor upgrades
- +Custom screen sizes available if your room is non-standard
What Sucks
- −$1,999 is expensive compared to a DIY EMT build ($150)
- −Assembly takes 2-3 hours even with tool-free design
- −No built-in projector shelf or cable management
- −Side netting tension adjustment is finicky
- −Not easily disassembled if you move rooms
The most important thing about a golf simulator enclosure isn’t the screen or the frame material or the side netting.
It’s whether you’ll actually build it.
There’s a reason so many sim builds end up as a launch monitor aimed at a net with a laptop on a folding table. The enclosure is the hardest part of the build. You have to measure, cut conduit, deburr edges, assemble corner connectors, tension the screen, hang blackout cloth, adjust, re-tension, curse, and then do it again because the screen has a wrinkle.
The SIG10 removes that entire process. It arrives in boxes. You assemble it with a provided Allen key. You hang the screen. You’re done.
The question is whether that convenience is worth $1,999.
What You Actually Get
The SIG10 is an aluminum frame system. Not EMT conduit — extruded aluminum with T-slot channels and corner brackets. The same kind of framing used for industrial workstations and 3D printer enclosures.
The frame: Heavy-gauge aluminum extrusions that bolt together with included hardware. No cutting required — Shop Indoor Golf cuts everything to your specified dimensions. The frame is rigid. It doesn’t flex when the ball hits the screen. It doesn’t wobble when you bump into it. It’s overbuilt, and that’s the right call for something that needs to sit in your garage for a decade.
The screen: SIG10 ships with their preferred impact screen. It’s a woven polyester material with a gain of about 1.0 (neutral — doesn’t boost or dim projector brightness). The material is tight-weave enough for good image quality but loose-weave enough that ball marks don’t show. The screen attaches to the frame via a bungee system every 8-10 inches. Tension is adjustable.
Foam padding: The frame comes with foam padding around every exposed edge. This matters more than you’d think. When you’re standing 8 feet from a screen, the enclosure frame is right next to your swing path. You don’t want to hit a follow-through on an aluminum extrusion. The foam is thick enough to absorb an errant club without damage to the club or the frame.
Side netting: Included. Not an upcharge. The netting catches balls that miss the screen by 6-12 inches. On a 10-foot-wide enclosure, that’s a meaningful safety margin.
Mat connectors: The SIG10 has brackets that connect your hitting mat to the enclosure base. This prevents the mat from creeping forward over time as balls hit the screen and bounce back. It’s a small thing that every sim owner eventually wishes they had.
The Assembly Experience
Let me be honest about what this involves.
The SIG10 is “tool-free” in the sense that you don’t need power tools. You need a provided Allen key and a second pair of hands for some steps. It takes 2-3 hours from opening the first box to hitting the first ball.
The instructions are good — printed, with photos, not translated-from-Chinese hieroglyphics. The frame sections are labeled. The hardware is organized by bag. Shop Indoor Golf has clearly done this a thousand times and improved the process.
The hardest part is tensioning the screen. The bungee system is straightforward, but getting even tension across a 10-foot screen takes patience. Work from the center outward. Adjust in small increments. Walk away if you get frustrated. The screen will look better tomorrow.
Where It Excels
Professional appearance. This is the main reason to buy the SIG10. A DIY EMT build can look great, but it rarely looks as clean as an extruded aluminum frame with integrated foam padding and a flush-mounted screen. The SIG10 looks like a commercial sim bay. Visitors will assume you spent more than you did.
Safety. The foam padding around every edge means you can swing freely without worrying about hitting a metal frame. The side netting catches offline shots without additional hardware. The screen tension is designed to absorb ball impact without dangerous bounceback.
Upgrade path. The SIG10 frame uses standard T-slot aluminum extrusion. You can add accessories — projector mounts, shelves, cable trays, side curtains — using standard T-slot hardware. The frame grows with your sim room.
Where It Falls Short
Price. $1,999 is a lot of money for a frame and a screen. The DIY alternative is $150 in EMT conduit from Home Depot. The gap is $1,849 — and that $1,849 could buy you a better launch monitor, a better mat, or a month of GSPro for the next 7 years.
No cable management. For a premium enclosure at this price, you’d expect some built-in cable routing. The SIG10 is a frame. You manage the cables yourself. If you’re running HDMI, power, and network cables from a projector to a PC, plan your routing before assembly.
Non-portable. The SIG10 is not something you disassemble and move easily. The aluminum frame bolts together solidly — which is great for stability, bad for relocation. If you might move rooms or houses, this is a factor.
SIG10 vs. DIY EMT: Who Wins, When
| Factor | SIG10 | DIY EMT |
|---|---|---|
| Cost | $1,999 | $150-200 |
| Build time | 2-3 hours | 6-12 hours |
| Tools required | Allen key | Hacksaw, conduit bender, deburring tool |
| Skill required | None | Basic DIY |
| Appearance | Commercial-grade | Good, with effort |
| Safety | Full foam padding | DIY padding optional |
| Screen quality | Premium included | Depends on what you buy |
| Customization | Order to your dimensions | Cut to exact size |
| Disassembly | Difficult | Easy |
The choice comes down to one question: do you want to build a frame or use a frame?
If you enjoy the building process or you’re on a tight budget, DIY EMT makes sense. The materials are cheap, the process is satisfying, and the result can look excellent with enough patience.
If you want your sim room to look like a commercial installation and you value your weekend time, the SIG10 is worth the premium.
The Verdict
The SIG10 enclosure gets an 8.5/10. The build quality is excellent. The assembly process is well-designed. The foam padding and side netting show that Shop Indoor Golf has thought about the real-world use of this thing. The screen quality is good.
The price is the limiting factor. $1,999 is a significant chunk of a sim budget. But it’s also a one-time purchase for something that will last through multiple launch monitor upgrades, multiple mat replacements, and multiple years of nightly use.
If you’re building a mid-range or premium sim and you don’t want to spend a weekend cutting conduit, the SIG10 is the enclosure to buy. It’s expensive. It’s also really good.
Buy the Shop Indoor Golf SIG10 Enclosure at shopindoorgolf.com for $1,999. Custom sizes available. Includes frame, screen, foam padding, side netting, and mat connectors. Assembly required with provided tools. 2-3 hours. One of the best enclosures on the market.
Related: SIG10 vs Carl’s Place Enclosures comparison | Best Golf Simulator Enclosures guide | Carl’s Place DIY Enclosure Review | Enclosure Build Guide | Best Impact Screens | Enclosure Hub
Head-to-Head Comparisons
Want to see how the SIG10 Enclosure stacks up against the competition?